Control Systems

Reliable and easy to use‍

FANUC 0i-TF  is available on GTV. FANUC is a technological leader with unsurpassed reliability and technical support. Cubic has worked with FANUC to tune the servo and spindle motors to deliver fast C-axis response rate as well as fast spindle and linear axis acceleration.

Work Holding

Wide range from 5C to 3-Jaw chuck‍

Cubic offers collet spindle noses in the widely available 5C and 16C configurations for high accuracy chucking. Also available is dead-length B42 (DIN6343 173E-type) collet chuck. The dead-length design has zero z-axis movement and eliminates workpiece pull-back when the collet is closed. Besides collets, to run GTV as chucker, A2-4 or A2-5 3-jaw or 4-jaw chucks can also be used.

The GTV’s hydraulically actuated chuck has stronger gripping force than air chucking allowing for heavier cuts.

‍

‍

‍